How to Professionally Paint Kitchen Cabinet

How to Professionally Paint Kitchen Cabinet

This is How the Experts Do It

You don’t need to be a pro or have PhDs to paint your kitchen cabinet and make it appear as an act of mastery.

Did you know that professionals charge approximately $5 to $10 per square foot of the kitchen cabinets surface? This means that you’ll need to dig deep into your pocket for $800 to $3,500 to have your kitchen cabinets painted by a professional Kildare Carpenter .

However, you don’t have to dig that deep while on the other hand you can use the DIY method and achieve a million-dollar kitchen.

In this blog, you are going to discover amazing knacks that you can employ to paint your kitchen cabinets like a pro.

1.  They Know the Best Method that Gives the Best Results

The final look will depend on the method you use to paint the cabinet.

The Paint Brush Method

The use of a paintbrush method means that the painter only uses the paintbrush majorly as his only tool. The danger of using this type of method is that the whole process will put up your time and also it will result in poor quality.

If you want smooth, creamy and uniform kitchen cabinets, then the paintbrush method is not the right route for you. learn more about choosing lovely colors for your home by clicking here

How to Professionally Paint Kitchen Cabinet

The Paint Spray Method

Unlike using the paintbrush method, professionals use the paint spray method to achieve smooth and consistent Kitchen cabinets and built in alcove units

Paint spray is loved because it is the fastest method experts use to paint kitchen cabinets and it doesn’t leave the surface inconsistent with brush strokes showing. The end product is even much better if you use good quality paint.

The only shortcomings that come with this type of method are that it requires good painting skills. You’ll need to prepare very well. Masking off surfaces and setting up a spraying booth for the doors and the chest of drawers should be delicately done.

The Rollers and Brush Method.

Professional painters use brushes to paint those notorious corners and rollers to give the cabinets that creamy touch. When compared to other methods, the roller and brush method gives a standard finish on kitchen cabinets.

2.  Pros Acknowledge the Importance of Following the Steps

Step 1: Get Rid of the Doors and Drawers

These two items can be painted elsewhere. You can use a screwdriver to separate the doors from the hinges. In market there are lot of handy painter tools that are different from art tools.

Step 2: Cleaning

No one wants to see paint peeling off a surface especially just after you’ve painted it. To avoid such mistakes you should see to it that this step is not skipped. Cleaning the cabinets helps to get rid of the grease and dirt that causes the paint to peel off.

Step 3: It’s Sandy Time

After cleaning the cabinets, using sandpaper with a grit between 100 to 200 sand off the surface of the cabinet entirely.

This step requires patience, sanding takes up your time but you can speed things up using orbital sandpaper. Always be keen to overdo or under-do it for the surface should be rough enough to adhere with the paint.

Step 4: Second Cleaning

Here the idea is to get rid of the dust produced during the sanding process.

Step 5: Masking Off

You don’t want to paint landing on other surfaces, right? Tape off the areas where you don’t want the paint to spill on using masking tape.

Step 6: Put Up a Drying Site

Lastly, you need to construct a drying area where you’ll place your doors and drawers to dry.  Set the area with racks for the doors to sit on.

Paint Gurus Know the Painting Steps

Step 1: Cabinet Preparation

Here is where you cover the whole surface with a high-quality primer. This allows the paint to stick and last longer.

Step 2: First Coat

After the primer dries, using the method you prefer, apply one even coat on the surface. The paint shouldn’t be thick.

Step 3: Second Coat

Some think or consider the second coat unnecessary. Well, if you want to achieve a quality finish just like the some done by a pro, you’ll need to apply the second coat

Step 4: Assembling

After the surface is dry and smooth (allow the surface to dry for at least 24 hours) then is when you put everything back together.

Conclusion

See, painting kitchen cabinets is not rocket science. Just follow the steps and paint the surfaces like a pro

Author: